Transmitter Supply Unit Series 9160 | Art. No. 220324

Explosion Protection
HART-Logo
SIL Logo
IS pac
Product Description: Transmitter supply unit Ex i field circuit
Product Type: 9160/19-11-11s
Art. No.: 220324
WebCode: 9160A
Availability Available in stock
  • Can be used universally for two- and three-conductor transmitters and mA sources (four-conductor transmitters)
  • high degree of accuracy
  • standard variant can be used up to SIL 2, special variant up to SIL3 (IEC/EN 61508)

Technical data

General

WebCode 9160A
Product variant Transmitter supply unit
Product Type 9160/19-11-11s
Product Description Transmitter supply unit Ex i field circuit
Highlights Can be used universally for two- and three-conductor transmitters and mA sources (four-conductor transmitters)
high degree of accuracy
standard variant can be used up to SIL 2, special variant up to SIL3 (IEC/EN 61508)
Functional Description 9160 series Ex i transmitter power supply units can be used for the intrinsically safe operation of two- and three-conductor transmitters or intrinsically safe mA sources such as four-conductor transmitters. The unit allows HART signals to be transmitted in both directions. The portfolio includes one- and two-channel units and a variant for signal duplication. Special versions are available for higher output voltages and SIL 3.

Explosion Protection

Application range (zones) 2, 22
Ex interface zone 0, 1, 2, 20, 21, 22
IECEx gas certificate IECEx BVS 08.0050 X
IECEx gas explosion protection Ex nA nC [ia Ga] IIC T4 Gc
IECEx dust certificate IECEx BVS 08.0050 X
IECEx dust explosion protection [Ex ia Da] IIIC
IECEx firedamp certificate IECEx BVS 08.0050 X
IECEx firedamp protection [Ex ia Ma] I
ATEX gas certificate DMT 03 ATEX E 010 X
ATEX gas explosion protection II 3 (1) G Ex nA nC [ia Ga] IIC T4 Gc
ATEX dust certificate DMT 03 ATEX E 010 X
ATEX dust explosion protection II (1) D [Ex ia Da] IIIC
ATEX firedamp certificate DMT 03 ATEX E 010 X
ATEX firedamp protection I (M1) [Ex ia Ma] I
Installation in Division NEC 500 (Class I, II, III) 2
Ex interface in Division NEC 500 (Class I, II, III) 1, 2
USA FM certificate FM16US0122X
USA FM gas explosion protection CL I, DIV 2, GP A,B,C,D; CL I, ZONE 2, AEx/Ex nA nC GP IIC T4
USA FM intrinsically safe connection CL I, DIV 2, GP A,B,C,D; CL I, ZONE 2, AEx/Ex nA nC GP IIC; AIS CL I,II,III, DIV 1, GP A,B,C,D,E,F,G; CL I, ZONE 0, [AEx/Ex ia] IIC T4 MOUNTING VERTICAL Ta = 70ºC or HORIZONTAL Ta = 60ºC; SEE DOC.
91 606 01 31 1
Canada FM certificate FM16CA0067X
Canada FM gas explosion protection CL I, DIV 2, GP A,B,C,D; CL I, ZONE 2, AEx/Ex nA nC GP IIC T4
Canada FM intrinsically safe connection CL I, DIV 2, GP A,B,C,D; CL I, ZONE 2, AEx/Ex nA nC GP IIC; AIS CL I,II,III, DIV 1, GP A,B,C,D,E,F,G; CL I, ZONE 0, [AEx/Ex ia] IIC T4 MOUNTING VERTICAL Ta = 70ºC or HORIZONTAL Ta = 60ºC; SEE DOC.
91 606 01 31 1
EAC certificate TS RU S-DE.GB04.B.00353
EAC gas explosion protection 7 2 Ex nA [ia Ga] IIC T4 Gc X
EAC dust explosion protection 7 [Ex ia Da] IIIC
Certificates ATEX (BVS), Brazil (ULB), Canada (FM), EAC (STV), IECEx (BVS), India (PESO), Korea (KTL), Russia (Meteorological certificate), SIL (exida), USA (FM)
Ship approval CCS, DNVGL

Safety Data

Maximum voltage Uo 27.00 V
Maximum current Io 88.0 mA
Maximum power Po 576.000 mW
Max. permissible external capacitance Co for IIC 0.090 μF
Max. permissible external capacitance Co for IIB 0.705 μF
Max. permissible external capacitance Co for IIA 2330.000
Max. permissible external capacitance Co for I 3750.000
Max. permissible external inductance Lo for IIC 2.300 mH
Max. permissible external inductance Lo for IIB 17.000 mH
Max. permissible external inductance Lo for IIA 28.00 mH
Max. permissible external inductance Lo for I 40.00 mH
Max. voltage Ui 30.0 V
Max. current Ii 100.0 mA
Max. voltage Uo isolation amplifier 4.1 V
Max. power Pi note Internally limited
Internal capacitance Ci negligible
Internal capacitance Ci isolating repeater negligible
Internal inductance Li negligible
Internal inductance Li isolating repeater negligible
Safety-related maximum voltage 253 V AC

Electrical Data

Signal types Analog Input
Number of channels 1
Transmitter supply mode Yes
Isolating repeater mode Yes
LFD relay Yes
Communication signal HART, 0.5 ... 10 kHz

Auxiliary power

Auxiliary power 24 V DC
Auxiliary power nominal voltage 24 V DC
Auxiliary power voltage range 18 ... 31,2 V
Voltage range residual ripple ≤ 3,6 VSS
Nominal current 148.00 mA
Max. power dissipation 2.80 W
Power consumption 3.40 W
Polarity reversal protection yes
Undervoltage monitoring Yes
Operation indication Green "PWR" LED

Galvanic isolation

Test voltage according to standard IEC EN 60079-11
Galvanic isolation Ex i input to output 1.5 kV AC
Galvanic isolation Ex i input to auxiliary power 1.5 kV AC
Galvanic isolation Ex i input to fault message contact 1,5 kV AC
Test voltage according to standard 2 EN 50178
Galvanic isolation output to auxiliary power 350 V AC
Galvanic isolation output to output 350 V AC
Galvanic isolation fault message contact to power supply 350 V AC

Input

Input function Isolation amplifier
Transmitter power unit
Input 0/4 ... 20 mA with HART
Input signal 0/4 ... 20 mA with HART
Input functional range 0 ... 24 mA
Input current max. mA sources 50 mA
Input for open-circuit voltage Ua ≤ 26 V
Short-circuit current ≤ 35 mA
Ex i input supply voltage for transmitter ≥ 16 V at 20 mA (for 2-wire)
Supply voltage for transmitter ≥ 16 V at 20 mA
Input resistance ≤ 100 Ω

Output

Output 0/4 ... 20 mA with HART
Output A 0/4 ... 20 mA
Output B 0/4 ... 20 mA (without HART)
Output signal 0/4 ... 20 mA with HART
Output current at Ie=0 0 mA
Output residual ripple ≤ 40 µAeff
Output functional range 0.0 - 24.0 mA
Load resistance RL 0 ... 600 Ω (terminal 1+ / 2- or 5+ / 6-)
0 ... 379 Ω (terminal 3+ / 2- or 4+ / 6-)
(with internal 221 Ω resistor for HART)
Load resistance RL max. HART 379 Ω
Load RL max. with resistor 379 Ω
Load resistance RL max. 600.00 Ω
Load resistance RL max. note With internal 221 Ω resistor
Communication signal note Only for output 1
Settling time 10 … 90 % ≤ 100 µs
Settling time note Output 2: ≤ 200 ms, typ. 100 ms
Switching capacity fault message contact 30 V / 100 mA
Switch user adjustment line fault activated / deactivated
Indication of line fault Red LED "LF" for each channel
Error detection wire breakage < 3.6 mA
Short circuit error detection > 20.5 mA
Error detection wire breakage OFF < 3,6 mA
Deviation ≤ 0,1 %
Temperature influence error limits ≤ 0,05 % / 10K
Behaviour of the output = input signal
Behaviour of the output note Genauigkeit, typische Angaben in % der Messspanne (20 mA) bei UN, 23 °C

Ambient Conditions

Ambient temperature -20 °C ... +70 °C (Single device)
-20 °C ... +60 °C (Group assembly)
Storage temperature -40°F ... +176°F
Storage temperature -40 °C ... +80 °C
Relative humidity max. 95%
Use at the height of < 2000 m

Mechanical Data

Degree of protection (IP) IP30
Terminal degree of protection (IP) IP20
Fire resistance (UL 94) V0
Connection cross-section 0.2-2.5 mm² flexible
0.25-2.5 mm² flexible core end sleeve
Enclosure material Polyamide
Grid dimension 17.60 mm
Weight 0.195 kg
Weight 0.43 lb

Mounting / Installation

Mounting type NS35/15, NS35/7.5 DIN rail
Mounting position vertical
horizontal
Connection type Screw terminal
Conductor cross-section solid min. 0.20 mm²
Conductor cross-section solid max. 2.5 mm²
Conduct cross-section flexible max. 0.20 mm²
Conduct cross-section flexible max. 2.5 mm²

Downloads

Description Document Type Language
Transmitter Supply Unit Series 9160 Rev. F Data Sheet
English
pdf 1.5 MB
Transmitter Supply Unit Series 9160 Rev. F Data Sheet
German
pdf 1.5 MB
Transmitter Supply Unit Series 9160 Rev. F Data Sheet
Russian
pdf 1.6 MB
9160 Transmitter Supply Unit GB Product Overview
English
pdf 686 KB
9160 Messumformerspeisegerät DE Product Overview
German
pdf 685 KB
Scope Certificate number Certification body Kind of document Product Variant Language
ATEX DMT03ATEXE010X BVS Ex Certificate 9160 9163
German
English
pdf 4.9 MB
ATEX 9160603020 BVS EU Declaration of Conformity 9160 9163
German
English
French
pdf 343 KB
BRA ULBR130533X ULB Ex Certificate 9160 9163
English
Portuguese
pdf 1.1 MB
CAN FM16CA0067X FM Ex Certificate 9196 9147 9194 9193 9192 9191 9186 9185 9182 9146 9195 9162 9160 9163 9164 9165 9167 9170 9172 9175 9176 9180
English
pdf 628 KB
CAN
USA
9160601311 FM Control drawings 9160 9163 pdf 359 KB
EAC TS_RU_S-DEGB04B00353 STV Ex Certificate 9143 9185 9162 9182 9146 9167 9165 9160 9175 9147 9163 9164 9170 9172 9176 9180 9186 9191 9192 9193 9194 9195 9196
Russian
pdf 7.8 MB
IECEX IECEXBVS080050X BVS Ex Certificate 9160 9163
English
pdf 556 KB
IND P400520 PESO Ex Certificate 9165 9170 9175 9176 9163 9160
English
pdf 511 KB
INT STAHL100201R027 exida FMEDA report 9160 9163
English
pdf 314 KB
KOR 15KA4BO0220X KTL Ex Certificate 9160
English
Korean
pdf 610 KB
MARITIM HB14T00021_02 CCS Ship's certificate of registry 9143 9146 9147 9160 9162 9163 9164 9165 9196 9195 9194 9193 9192 9191 9186 9185 9182 9180 9176 9175 9172 9170 9167
Chinese
English
pdf 2.3 MB
MARITIM MRA000000V DNVGL EU RO Mutual Recognition 9143 9146 9147 9160 9162 9163 9164 9185 9186 9191 9192 9193 9194 9195 9196 9182 9180 9176 9175 9172 9170 9167 9165
English
pdf 72 KB
RUS DES34002A_NO62141 VNIIM Metrological certificate 9482/33 9182 9160 9162 9163 9164 9165 9167 9180 9482/32 9461/12 9460 9461/15 9465 9466/12 9466/15 9468/32 9468/33 9480 9481
Russian
pdf 504 KB
USA FM16US0122X FM Ex Certificate 9196 9147 9194 9193 9192 9191 9186 9185 9182 9146 9195 9162 9160 9163 9164 9165 9167 9170 9172 9175 9176 9180
English
pdf 627 KB
Description Product Variant Language
Operating instructions 9160617310_001_04 9160
German
English
pdf 1.9 MB
Operating instructions 9160618310_001_04 9160
Russian
pdf 1.1 MB
Operating instructions 9160619310_001_04 9160
Portuguese
pdf 1019 KB
Safety Manual 9160616310_001_06 9160 9163
English
pdf 106 KB
Description
DXF_ISpac_91xx_17mm dxf 116 KB
DXF_ISpac_91xx_17mm dxf 116 KB
STEP_ISpac_91xx/10_17mm single channel ifc 837 KB
STEP_ISpac_91xx/10_17mm single channel ifc 837 KB
STEP_ISpac_91xx/20_17mm dual channel ifc 1.1 MB
STEP_ISpac_91xx/20_17mm dual channel ifc 1.1 MB

Accessories

Screw terminal

Art. No.: 112817

3-pole plug, screw connectorthread: M3stripping length: 7 mmcolour: green

Screw terminal

Art. No.: 112816

3-pole plug, screw connectorthread: M3stripping length: 7 mmcolour: black

Screw terminal

Art. No.: 112818

3-pole plug, screw connectorthread: M3stripping length: 7 mmcolour: blue

Screw terminal with test tap

Art. No.: 113005

3-pole plug with test tap, screw connectorthread: M3stripping length: 7 mmcolour: black

Screw terminal with test tap

Art. No.: 113004

3-pole plug with test tap, screw connectorthread: M3stripping length: 7 mmcolour: blue

Spring clamp terminal

Art. No.: 112825

3-pole plug with test tap, spring clamp connectionstripping length: 10 mmcolour: green

Spring clamp terminal

Art. No.: 112824

3-pole plug with test tap, spring clamp connectionstripping length: 10 mmcolour: black

Spring clamp terminal

Art. No.: 112826

3-pole plug with test tap, spring clamp connectionstripping length: 10 mmcolour: blue

DIN rail

Art. No.: 103714

NS 35 / 15 (available by the metre)

DIN rai

Art. No.: 103707

NS 35 / 7.5 (available by the metre)

ISpac Dummy-Module

Art. No.: 160674

The Dummy module is used for the connection of unused cable. There is no electrical connection between input and output terminal.

Front cover

Art. No.: 200914

yellow, transparent. Clear marking of the device for SIL applications. (Packaging unit: 10 pieces)

pac-Bus

Art. No.: 160731

Wiring auxiliary power and collective error message

Terminal set for pac-Bus

Art. No.: 160730

For the supply of 24 V DC auxiliary power via terminals (alternative to using the supply module 9193/21-11-11), with jumper for error message chain for ISpac module 91xx

Previous

Contact form

*Mandatory fields
Previous

We'll be glad to call you back to support you.

Wir rufen Sie gerne für ein Beratungsgespräch zurück. EN
*Mandatory