Status Light Series TEF9980 | Art. No. 262976

Explosion Protection
Tranberg
Product Description: Repeater light For helicopter deck
Product Type: TEF9980005
Art. No.: 262976
WebCode: T9980A
Availability Available in the short term
  • Status light as described in CAA UK CAP437, NORMAM-27/DPC and 2009 MODU Code
  • Height of light units <25 cm. Allows for on-deck installation
  • Automatic monitoring of all light units when in combination with Tranberg control system. No need for redundancy units
  • Maintenance free
  • Night vision goggle (NVG) compatible
  • Low power consumption: Main light, 30 W and Repeater light 2.6 W

Technical data

General

WebCode T9980A
Title Product Variant Technical Data TEF 9980 Helideck - Repeater Light
Product Type TEF9980005
Product Description Repeater light For helicopter deck
Highlights Status light as described in CAA UK CAP437, NORMAM-27/DPC and 2009 MODU Code
Height of light units <25 cm. Allows for on-deck installation
Automatic monitoring of all light units when in combination with Tranberg control system. No need for redundancy units
Maintenance free
Night vision goggle (NVG) compatible
Low power consumption: Main light, 30 W and Repeater light 2.6 W
Functional Description The TEF9980 Status lights are designed to fulfil the latest requirements of CAA UK CAP 437, as well as operator’s needs for products that are cost-effective, reliable, require no maintenance and are applicable for use in all environments.
The TEF 9980 Status light is available as a main light and as a repeater light. Both versions are fully monitored, which eliminates the light units’ redundancy need. In combination with Tranberg control system the lights can be set up for automatic test intervals, timeouts for both dim level diagnostics.
A status light system should be installed if a condition can exist on an installation which may be hazardous for the helicopter or its occupants. The system should be a flashing red light (or lights), visible to the pilot from any direction of approach and on any landing heading. The aeronautical meaning of a flashing red light is either “do not land, aerodrome not available for landing” or “move clear of landing area”. The system should be automatically initiated at the appropriate hazard level (e.g. impending gas release)

Explosion Protection

Application range (zones) 1, 2
IECEx gas certificate in preparation
IECEx gas explosion protection Ex db op is IIB+H2 T5 Gb
ATEX gas certificate in preparation
ATEX gas explosion protection II 2 G Ex db op is IIB+H2 T5 Gb

Electrical Data

Rated operational voltage DC 16.00 - 32.00 V
Power 30.00 W mW

Lighting Data

Lamp Red LED + IR
Flash rate 2/s

Ambient Conditions

Ambient temperature -40 °C ... +55 °C

Mechanical Data

Degree of protection (IP) IP66
Degree of protection IP (IEC 60529) IP67
Enclosure material Aluminium, powder-coated, Seawater-resistant
Material dome Glass Temperature-resistant
Conductor length 3 m
Type of connection cable BFOU 0.6/1.2kV P5/P12
Width 263.000 mm
Height 245.000 mm
Length 200.000 mm
Weight 0 lb

Mounting / Installation

Connection type Connection line
Material mounting parts Stainless steel

Downloads

Description Document Type Language
TEF9980 Status Light GB Product Overview
English
pdf 449 KB
Previous

Contact form

*Mandatory fields
Previous

We'll be glad to call you back to support you.

Wir rufen Sie gerne für ein Beratungsgespräch zurück. EN
*Mandatory