Digital I/O modules

Versatile modules for digital signals in hazardous areas
The digital I/O modules (DIOM) are suitable for connecting up to 16 intrinsically safe digital signals. The channels can be used in pairs as inputs for contacts or proximity switches, or as outputs for low-power solenoid valves or indicator lamps. In addition, frequency/counter inputs are available with or without rotation direction recognition.

The digital I/O modules (DIOM) can be used to connect up to 16 intrinsically safe digital signals. All channels can be used in pairs as inputs for passive contacts or NAMUR proximity switches (EN 60947-5-6) or as outputs for low-power solenoid valves or Ex i indicator lamps.

Up to eight inputs can be used as frequency inputs/counters up to 20 kHz, and up to four inputs can be used in the "Rotation direction recognition" and "Forwards/backwards counter" operating modes. The Ex i inputs/outputs are short-circuit proof and galvanically separated from the system.

A blue LED and diagnostic messages provide early warnings that maintenance is required in order to avoid system downtime.
The Zone 1 versions have additional LEDs for each channel to indicate any line faults and the switching state.

*Versatile: Channels can be used in pairs as inputs or outputs
Versions with Ex ia inputs/outputs for installation in Zone 1 or Zone 2
Hot-swappable: Can be replaced while the system is in operation

Filter product lines

Select the product lines that are applicable to your intended use.

5 Series (6 Products)

Digital Input Output Module for Zone 1 / CIass I, Div. 1 Series 9470/32

16 channels can be used in pairs as inputs or outputs
Intrinsically safe Ex ia inputs/outputs with line fault monitoring
Module in Zone 1 and Class I, Div. 1 can be replaced during operation (hot swap)

Digital Input Output Module for Zone 2 / CIass I, Div. 2 Series 9470/33

16 channels can be used in pairs as inputs or outputs
Intrinsically safe Ex ia inputs/outputs with line fault monitoring
Module in Zone 2 and Class I, Div. 2 can be replaced during operation (hot swap)

Digital Input Output Module NAMUR for Zone 2 / CIass I, Div. 2 nonincendive Series 9471/35

16 channels can be used in pairs as inputs or outputs
Inputs/outputs Ex ec with line fault monitoring and LED error and status indication for each channel
Module in Zone 2 and Class I, Div. 2 can be replaced during operation (hot swap)

Digital Input Output Module 24 V for Zone 2 / CIass I, Div. 2 nonincendive Series 9472/35

16 channels can be used in pairs as inputs or outputs (24 V / 0.5 A)
Inputs/outputs Ex ec with line fault monitoring and LED error and status indication for each channel plus SIL 2 plant-stop input
Module in Zone 2 and Class I, Div. 2 can be replaced during operation (hot swap)

Digital Input Module NAMUR Ex i / I.S. Inputs, 16 Channels for Zone 1 / Div. 1 Series 9470/22

Sixteen channels for contacts and NAMUR proximity sensors – can also be used for frequencies
Intrinsically safe Ex ia IIC inputs with line fault monitoring
Module in Zone 1 can be hot swapped