All distribution sites

Search for subsidiaries and agencies
x
Search
Previous
GBR - en
logo
ALL DISTRIBUTION

Search

Webcode overview

System components and accessories

Filter product lines

hide
Ex interface zone
Ex interface Zone
Number of Channels
Width
Height
Designation 2
Subsitution for material

8 Series (38 Products)

IS1 DTM devices Series 9499/DTM R. STAHL

IS1 DTM devices Series 9499/DTM

  • Communication via PROFIBUS DP, Modbus RTU and Ethernet protocols
  • Parameterisation and configuration of the IS1+ system with connected HART field devices
  • Automatic topology generation,identification and maintenance, HART live list,condition monitoring
IS Wizard Series 9499 PC software R. STAHL

IS Wizard Series 9499 PC software

  • Diagnostics tool for installations with Modbus RTU (configuration and parameterisation) and PROFIBUS DP (error diagnosis)
  • Testing and error diagnosis of IS1+ systems and the connected HART field devices, even without process bus function
  • Continuous access to all HART variables
Standard enclosure for remote I/O Series NEC/CE Code for Zone 2/Cl. I, II, Div. 2
Ex Standard enclosure for remote I/O Series NEC/CE Code for Zone 2/Cl. I, II, Div. 2 R. STAHL

Standard enclosure for remote I/O Series NEC/CE Code for Zone 2/Cl. I, II, Div. 2

  • Ready to install for NEC®, CE Code Class I, II, Div. 2 and Zone 2 areas
  • 316SS NEMA 4X enclosure (based on Series 8150)
  • I/O modules need to be purchased separately
  • The Ex interface depends on the selected I/O modules
Standard enclosure for remote I/O Series NEC/CE Code for Cl. I, Div. 1
Ex Standard enclosure for remote I/O Series NEC/CE Code for Cl. I, Div. 1 R. STAHL

Standard enclosure for remote I/O Series NEC/CE Code for Cl. I, Div. 1

  • Ready to install for NEC®, CE Code Class I, Div. 1
  • 316SS NEMA 4X enclosure (based on Series 8150)
  • I/O modules need to be purchased separately
  • The Ex interface depends on the selected I/O modules
Termination board 9491
Ex Termination board 9491 R. STAHL

Termination board 9491

  • Redundant operation of IS1+ I/O modules
  • Suitable for I/O modules with non-intrinsically safe I/O from firmware 4.xx
  • Simple installation on DIN rail and connection via push-in terminals
  • Installation in Zone 2
9494 BusRail and accessories
Ex 9494 BusRail and accessories R. STAHL

9494 BusRail and accessories

  • To provide an internal electrical condition between the CPU & power modules and up to 16 I/O modules
  • Redundant data bus, power bus with high availability
  • Simple and protected installation on NS35/15 DIN rails
  • Passive component with redundancy and high availability
Standard enclosure for remote I/O Series 8150
Ex Standard enclosure for remote I/O Series 8150 R. STAHL

Standard enclosure for remote I/O Series 8150

  • Short delivery times
  • Can be used in Zone 1 without acceptance testing or certification
  • For 24 V DC and 120/230 V AC
  • Ready for use, prefabricated with entries, BusRails, connection terminals, etc.
  • Modifications, extensions and customer-specific adaptations are possible
Standard enclosure for remote I/O Series 7145
Ex Standard enclosure for remote I/O Series 7145 R. STAHL

Standard enclosure for remote I/O Series 7145

  • Short delivery times
  • Can be used in Zone 2 without acceptance testing or certification
  • Ready for use, prefabricated with entries, BusRails, connection terminals, etc.
  • Modifications, extensions and customer-specific adaptations are possible