Inputs for temperature sensors, 8 channels Inputs for temperature sensors, 8 channels

Temperature input modules

Flexible temperature input modules for hazardous locations
The temperature input modules use eight channels to process intrinsically safe signals from all common temperature sensors such as resistance temperature detectors (two-, three- and four-wire connection) and thermocouples (internal or external reference junction). Resistance transmitters, mV sensors and joysticks can also be connected.

The temperature input modules can be used to connect up to eight intrinsically safe temperature sensors to the IS1+ remote I/O system.
Each channel can be used as an input for two-, three- and four-wire Pt, Ni and Cu resistance temperature detectors or as earthed/insulated thermocouples in accordance with DIN, IEC and GOST standards.
For thermocouples, the reference junction temperature is either compensated internally or by means of an external reference junction.
Resistance transmitters, mV sensors and, in the "Four-channel fast" operating mode, joysticks, are also supported with a very short signal delay.

A blue LED and diagnostic messages provide early warnings that maintenance is required in order to avoid system downtime.
The Zone 1 and Class I Div.1 versions have additional LEDs for each channel to indicate any line faults.

  • Flexible: Each channel can be used for resistance temperature detectors or thermocouples
  • Versions with Ex ia intrinsically safe inputs for installation in Zone 1, 2 and Class I Div.1, 2
  • Hot-swappable: Can be replaced while the system is in operation in explosive atmospheres

Filter product lines

Select the product lines that are applicable to your intended use.

Filter product lines

hide
Certificates
Zone Filter
Installation
Class1 Division and Zone
Application range (zones)
Ex interface zone