Helideck systems

Safely lit helicopter landing pads
Helideck systems illuminate helicopter landing pads brightly and completely eliminate the possibility of explosions. R. STAHL fully equips you for harsh conditions and inhospitable environments, from floodlights and perimeter lighting to the characteristic illuminated "H" in the circle, illuminated wind sleeves and control equipment.

Helicopter pilots must be able to locate their landing pad with absolute certainty. The HLITE lighting system is an extremely low, non-slip system that is highly reliable and can be installed with very little effort. This system fulfils the requirements of the Helicopter Certification Agency (HCA). Thanks to the duplicated, independent power supply circuit and LED bypass devices, the effect of an individual LED failing is only localised.

The TEF 9964 and TEF 9970 xenon and LED floodlights brightly illuminate the landing pad without dazzling the pilots. Not only that, but they are vibration-resistant, easy to maintain and have a long service life.

The Tranberg control systems make it easy to control the illumination of the helideck and other areas. In the event of a fault, they alert the user with an audible alarm and visual warning.

  • Suitable for offshore and shipping applications
  • All products are easy to install and maintain
  • Proven Tranberg technology

Filter product lines

Select the product lines that are applicable to your intended use.

Min. ambient temperature
Max. ambient temperature
Type of protection (IP)

8 Series (27 Products)

Commander Utility Series TEF4500

  • Backlit text and graphics with dimming control
  • Audible and visual alarms
  • Custom made text

Obstruction Light Low Intensity Series TEF2440

  • Rugged construction
  • Complies with: ICAO Annex 14 Vol. 1 Ch. 6 Low Intensity Type B
  • Low maintenance
  • Low power consumption
  • Resistant to vibrations
  • Long lifetime expectary
  • Integrated drain plug

Xenon Helideck Floodlight Series TEF9964

  • Degree of protection IP66/IP67, for use in hazardous areas
  • easy to install, easy to maintain
  • enclosure made from acid-resistant stainless steel (SS316L), protective glass/safety glass

TD/PM Circle & H Identification Lighting System Series CHLITE

  • Factory sealed LED lighting element
  • Easy to install: minimized installation and shut down time for the helideck
  • Extremely low profile (22 mm), under the required specifications
  • Versatile installation: Cable routing above deck or below deck
  • Anti-slip polysiloxane system coated stainless steel and high impact resistant composite PC provide a corrosion free solution for all decks
  • Anti-slip surface
  • No junction boxes on the surface of the helideck
  • Low power consumption
  • High reliability - maintenance free for all „on“ deck components
  • CAP437 Compliant 7th Edition with Amendment

Helideck Floodlight LED Series TEF9970

  • Floodlight for helideck landing areas
  • For use in hazardous areas
  • Floodlighting
  • Rugged and low profile floodlight made from marine proofed aluminium
  • Sealed for life
  • Simple to install and maintain
  • Light module is maintenance free
  • Proven degree of protection
  • Resistant to vibrations
  • Complies with: ICAO Annex 14 Vol. II; NORSOK C-004 201

Integrated Helideck Light Control TEF4600

  • All control gear in one cabinet, simplifying connections, control and monitoring
  • Smaller footprint than individual control cabinets for each type of light
  • Combined with Tranberg’s new line of LED helideck lights means an installation with an absolute minimum of required inspections and minimized maintenance
  • Connection with a supervisory control system through Ethernet, Profibus or similar standards
  • Optional touchscreen, allowing local control (Zone 1 panel or non-Ex)
  • Optional remote button and lamp control panel, allowing additional control of lights

Flashing Beacon Xenon Series TEF2430

  • Rugged and low profile
  • Easy to install and maintain
  • Proven ingress protection
  • Wide range of coloured globes available
  • Resistant to vibrations
  • Flash light
  • Signal light
  • Obstacle marking

Status Light Series TEF9980

  • Status light as described in CAA UK CAP437, NORMAM-27/DPC and 2009 MODU Code
  • Height of light units <25 cm. Allows for on-deck installation
  • Automatic monitoring of all light units when in combination with Tranberg control system. No need for redundancy units
  • Maintenance free
  • Night vision goggle (NVG) compatible
  • Low power consumption: Main light, 30 W and Repeater light 2.6 W

Ask our experts


Contact form

*Mandatory fields

We'll be glad to call you back to support you.

Wir rufen Sie gerne für ein Beratungsgespräch zurück. EN